This 1.5m CAT6A patch lead from Nimbus is rated to 500MHz and handles 10GBASE-T across a full 100 metre channel. It is the cable to choose for 10 Gigabit server, storage and uplink connections.
The cable uses a braided outer screen plus foil around every pair (S/FTP), the heaviest screening used on copper patch leads. For the screen to do its job, pair it with shielded panels, keystones and switch ports. Its LSZH sheath (low smoke zero halogen) limits smoke and toxic fumes if there is a fire, and is often a requirement in offices, schools and hospitals. Using 26 AWG copper makes it a little thinner and easier to dress neatly than heavier-gauge leads. Snagless boots shield the RJ45 clip, so it will not catch when the lead is pulled through a bundle or snap off in use.
It supports Power over Ethernet up to IEEE 802.3bt (PoE++), so one cable powers and connects IP cameras, wireless access points and desk phones.
Typical uses are floor box to laptop dock, router to smart TV, or patching between two adjacent cabinets. In a crowded patch panel, a blue lead stands out at a glance.
Specification
- Cable category: CAT6A
- Length: 1.5m
- Colour: Blue
- Screening: S/FTP
- Conductor size: 26 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 500MHz
