A 0.5m CAT6 Ethernet patch lead rated to 250MHz, good for Gigabit Ethernet at up to 100 metres, with 10GBASE-T possible on shorter links of around 55 metres. That headroom makes it a safe default for new office and home networks.
The cable uses an overall foil wrap around the four pairs (F/UTP) to keep outside electrical noise out. For the screen to do its job, pair it with shielded panels, keystones and switch ports. An LSZH (low smoke, zero halogen) jacket is used, which is what most building specifications now call for indoors. Using 26 AWG copper makes it a little thinner and easier to dress neatly than heavier-gauge leads. The RJ45 latch is protected by snagless boots, which stop it hooking on other cables or breaking.
Short lengths like this keep a cabinet neat: patch panel to switch, or switch to switch, with no slack to tie up. Green is one of several colours in the range, so you can colour-code by department, VLAN or device type.
Specification
- Cable category: CAT6
- Length: 0.5m
- Colour: Green
- Screening: F/UTP
- Conductor size: 26 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Bandwidth: 250MHz
