A 1.5m CAT6 Ethernet patch lead rated to 250MHz, good for Gigabit Ethernet at up to 100 metres, with 10GBASE-T possible on shorter links of around 55 metres. That headroom makes it a safe default for new office and home networks.
The cable uses unscreened twisted pairs (U/UTP), which is all most homes and offices need. An LSZH (low smoke, zero halogen) jacket is used, which is what most building specifications now call for indoors. 24 AWG conductors are the heavier gauge, giving lower resistance on longer leads and with PoE devices. Snagless boots shield the RJ45 clip, so it will not catch when the lead is pulled through a bundle or snap off in use.
PoE ready: it can carry power alongside data to cameras, access points and VoIP handsets under IEEE 802.3af, 802.3at and 802.3bt (PoE++), up to 90W at the switch.
Typical uses are floor box to laptop dock, router to smart TV, or patching between two adjacent cabinets. In a crowded patch panel, a green lead stands out at a glance.
Specification
- Cable category: CAT6
- Length: 1.5m
- Colour: Green
- Screening: U/UTP
- Conductor size: 24 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 250MHz
