This 1m CAT6 patch lead from Nimbus is rated to 250MHz and handles Gigabit Ethernet at up to 100 metres, with 10GBASE-T possible on shorter links of around 55 metres. That headroom makes it a safe default for new office and home networks.
The cable uses unscreened twisted pairs (U/UTP), which is all most homes and offices need. Its LSZH sheath (low smoke zero halogen) limits smoke and toxic fumes if there is a fire, and is often a requirement in offices, schools and hospitals. Its 24 AWG copper cores are thicker than the 26 AWG found in many patch leads, which helps with longer runs and powered devices. Snagless boots shield the RJ45 clip, so it will not catch when the lead is pulled through a bundle or snap off in use.
PoE ready: it can carry power alongside data to cameras, access points and VoIP handsets under IEEE 802.3af, 802.3at and 802.3bt (PoE++), up to 90W at the switch.
A good length for the desk: wall socket to PC, router to games console, or a short hop between neighbouring racks. Choosing black leads for one job (cameras, phones or uplinks, say) makes faults quicker to trace later.
Specification
- Cable category: CAT6
- Length: 1m
- Colour: Black
- Screening: U/UTP
- Conductor size: 24 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 250MHz
