This 1m CAT6A patch lead from Nimbus is rated to 500MHz and handles 10GBASE-T across a full 100 metre channel. That makes it a sensible choice for 10G switch uplinks, NAS boxes and multi-gig Wi-Fi access points.
The cable uses a braided outer screen plus foil around every pair (S/FTP), the heaviest screening used on copper patch leads. For the screen to do its job, pair it with shielded panels, keystones and switch ports. An LSZH (low smoke, zero halogen) jacket is used, which is what most building specifications now call for indoors. Using 26 AWG copper makes it a little thinner and easier to dress neatly than heavier-gauge leads. The RJ45 latch is protected by snagless boots, which stop it hooking on other cables or breaking.
It supports Power over Ethernet up to IEEE 802.3bt (PoE++), so one cable powers and connects IP cameras, wireless access points and desk phones.
Handy at a desk or TV cabinet, and long enough to patch across a rack or to the next cabinet along. Choosing black leads for one job (cameras, phones or uplinks, say) makes faults quicker to trace later.
Specification
- Cable category: CAT6A
- Length: 1m
- Colour: Black
- Screening: S/FTP
- Conductor size: 26 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 500MHz
