A 5m CAT6A Ethernet patch lead rated to 500MHz, good for 10GBASE-T across a full 100 metre channel. That makes it a sensible choice for 10G switch uplinks, NAS boxes and multi-gig Wi-Fi access points.
The cable uses a braided outer screen plus foil around every pair (S/FTP), the heaviest screening used on copper patch leads. Screened leads work best when the switch ports and patch panel are screened as well. Its LSZH sheath (low smoke zero halogen) limits smoke and toxic fumes if there is a fire, and is often a requirement in offices, schools and hospitals. 26 AWG conductors keep the lead slimmer and more flexible than a 24 AWG cable. Snagless boots shield the RJ45 clip, so it will not catch when the lead is pulled through a bundle or snap off in use.
PoE ready: it can carry power alongside data to cameras, access points and VoIP handsets under IEEE 802.3af, 802.3at and 802.3bt (PoE++), up to 90W at the switch.
This length crosses a room or an office bay, for example from a router on a shelf to a desk on the far wall. Choosing yellow leads for one job (cameras, phones or uplinks, say) makes faults quicker to trace later.
Specification
- Cable category: CAT6A
- Length: 5m
- Colour: Yellow
- Screening: S/FTP
- Conductor size: 26 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 500MHz
