This 1.5m CAT6A patch lead from Nimbus is rated to 500MHz and handles 10GBASE-T across a full 100 metre channel. That makes it a sensible choice for 10G switch uplinks, NAS boxes and multi-gig Wi-Fi access points.
The cable uses a separate foil screen on each pair (U/FTP), which keeps crosstalk between the pairs very low. Screened leads work best when the switch ports and patch panel are screened as well. The sheath is LSZH, meaning it produces little smoke and no halogen gases in a fire; many commercial and public buildings ask for it. Thin 30 AWG conductors give a slim cable that bends easily and packs densely into busy switches. Slim leads are designed for patching, so keep them to the shorter lengths used inside cabinets and at desks. Snagless boots shield the RJ45 clip, so it will not catch when the lead is pulled through a bundle or snap off in use.
It supports Power over Ethernet up to IEEE 802.3bt (PoE++), so one cable powers and connects IP cameras, wireless access points and desk phones.
A good length for the desk: wall socket to PC, router to games console, or a short hop between neighbouring racks. In a crowded patch panel, a yellow lead stands out at a glance.
Specification
- Cable category: CAT6A
- Length: 1.5m
- Colour: Yellow
- Screening: U/FTP
- Conductor size: 30 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 500MHz
