Rated to 500MHz, this 5m CAT6A lead carries 10GBASE-T across a full 100 metre channel. It is the cable to choose for 10 Gigabit server, storage and uplink connections.
The cable uses a separate foil screen on each pair (U/FTP), which keeps crosstalk between the pairs very low. Screened leads work best when the switch ports and patch panel are screened as well. The sheath is LSZH, meaning it produces little smoke and no halogen gases in a fire; many commercial and public buildings ask for it. Thin 30 AWG conductors give a slim cable that bends easily and packs densely into busy switches. Slim leads are designed for patching, so keep them to the shorter lengths used inside cabinets and at desks. The RJ45 latch is protected by snagless boots, which stop it hooking on other cables or breaking.
PoE ready: it can carry power alongside data to cameras, access points and VoIP handsets under IEEE 802.3af, 802.3at and 802.3bt (PoE++), up to 90W at the switch.
Long enough to run from a wall port to a desk across the room, or between cabinets in a comms room. Choosing white leads for one job (cameras, phones or uplinks, say) makes faults quicker to trace later.
Specification
- Cable category: CAT6A
- Length: 5m
- Colour: White
- Screening: U/FTP
- Conductor size: 30 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 500MHz
