This 3m CAT6A patch lead from Nimbus is rated to 500MHz and handles 10GBASE-T across a full 100 metre channel. That makes it a sensible choice for 10G switch uplinks, NAS boxes and multi-gig Wi-Fi access points.
The cable uses a braided outer screen plus foil around every pair (S/FTP), the heaviest screening used on copper patch leads. Screened leads work best when the switch ports and patch panel are screened as well. Its LSZH sheath (low smoke zero halogen) limits smoke and toxic fumes if there is a fire, and is often a requirement in offices, schools and hospitals. Using 26 AWG copper makes it a little thinner and easier to dress neatly than heavier-gauge leads. The RJ45 latch is protected by snagless boots, which stop it hooking on other cables or breaking.
PoE ready: it can carry power alongside data to cameras, access points and VoIP handsets under IEEE 802.3af, 802.3at and 802.3bt (PoE++), up to 90W at the switch.
Use it where the equipment is a few metres apart, such as a router in the hall and a computer in the next room. Choosing orange leads for one job (cameras, phones or uplinks, say) makes faults quicker to trace later.
Specification
- Cable category: CAT6A
- Length: 3m
- Colour: Orange
- Screening: S/FTP
- Conductor size: 26 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 500MHz
