A 1m CAT6 Ethernet patch lead rated to 250MHz, good for Gigabit Ethernet at up to 100 metres, with 10GBASE-T possible on shorter links of around 55 metres. That headroom makes it a safe default for new office and home networks.
The cable uses an overall foil wrap around the four pairs (F/UTP) to keep outside electrical noise out. For the screen to do its job, pair it with shielded panels, keystones and switch ports. The sheath is LSZH, meaning it produces little smoke and no halogen gases in a fire; many commercial and public buildings ask for it. Using 26 AWG copper makes it a little thinner and easier to dress neatly than heavier-gauge leads. Snagless boots shield the RJ45 clip, so it will not catch when the lead is pulled through a bundle or snap off in use.
A good length for the desk: wall socket to PC, router to games console, or a short hop between neighbouring racks. In a crowded patch panel, a blue lead stands out at a glance.
Specification
- Cable category: CAT6
- Length: 1m
- Colour: Blue
- Screening: F/UTP
- Conductor size: 26 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Bandwidth: 250MHz
