
Network Economiser
6 products
Network cable economisers let two devices share one network cable run. They are used in pairs, one at each end of the cable, with versions for two data connections (RJ-ECON and RJ-MOD), data and voice (RJ-ECONDV) or two voice lines (RJ-ECONVV).
How a network economiser works
A standard network cable has four twisted pairs, but 10/100 ethernet and telephone lines only use two of them. An economiser splits one cable into two separate connections, so you can add a second network point or a phone line to a room without running another cable. Fit one economiser at the patch panel or switch end and the matching one at the wall socket, and connect both to the same cable run.
Because each connection only has two pairs, data connections through an economiser run at up to 100 Mbps rather than Gigabit, which is fine for printers, phones, tills and most office devices. If you need Gigabit speed, run a separate cable using our bulk network cable and faceplates. Not sure which economiser you need? Call our team on 0207 100 6326.





