A 0.25m CAT6A Ethernet patch lead rated to 500MHz, good for 10GBASE-T across a full 100 metre channel. That makes it a sensible choice for 10G switch uplinks, NAS boxes and multi-gig Wi-Fi access points.
The cable uses a separate foil screen on each pair (U/FTP), which keeps crosstalk between the pairs very low. For the screen to do its job, pair it with shielded panels, keystones and switch ports. The sheath is LSZH, meaning it produces little smoke and no halogen gases in a fire; many commercial and public buildings ask for it. At 30 AWG the cable is much thinner than a standard lead, freeing up space and airflow in crowded cabinets. Slim leads are designed for patching, so keep them to the shorter lengths used inside cabinets and at desks. The RJ45 latch is protected by snagless boots, which stop it hooking on other cables or breaking.
PoE ready: it can carry power alongside data to cameras, access points and VoIP handsets under IEEE 802.3af, 802.3at and 802.3bt (PoE++), up to 90W at the switch.
Use it for tight patching inside a rack, where a longer lead would only end up coiled behind the equipment. Yellow is one of several colours in the range, so you can colour-code by department, VLAN or device type.
Specification
- Cable category: CAT6A
- Length: 0.25m
- Colour: Yellow
- Screening: U/FTP
- Conductor size: 30 AWG
- Sheath: LSZH
- Boots: Snagless
- Plugs: RJ45 to RJ45
- Power over Ethernet: Up to 802.3bt (PoE++)
- Bandwidth: 500MHz
